Stainless Steel, for High Voltages (HVB)

The HVB high voltage box is especially designed for the installation of power distribution networks. This variation from the XLS series comes with Ex e and Ex tb certifications, and provides a solution for connecting high voltage cables in field applications.

3 equally spaced internal bus bars rated to 6.6 kV and 650 A are mounted on insulators. The internal arrangement of the connection bars ensures total electrical insulation. Additionally, the HVB terminal box is equipped with a hasp through the enclosure lid. This provides a vandal proof method of securing the enclosure lid via padlocking.

The HVB terminal box can be equipped with various types of cable glands according to your individual needs. Contact your Pepperl+Fuchs representative to specify your personal requirements.

Get all available information on this series at the website of Pepperl+Fuchs.

Product Data

  • Certified Ex e and Ex tb for zones 1, 2, 21, 22
  • Suitable for use in gas zones 1 and 2 up to gas group IIC, and dust areas up to Zone 21 and dust group IIIC
  • For cable cross sections up to 70 mm²
  • Ambient temperature range: -50 °C to +55 °C
  • Ingress protection: IP66 to EN 60529
  • Material: 316L stainless steel, surface electropolished
  • Dimensions: 977 x 677 x 300 mm
  • Various international certifications including ATEX and IECEx

Briefly Introduced...

EX E HIGH VOLTAGE TERMINAL ENCLOSURE HVB6.6

An Ex e certified high voltage terminal enclosure made from stainless steel. Built for installation of power distribution networks Size: 977 mm x 677 mm x 300 mm. Suited for use in Zone 1, Zone 2, Zone 21 and Zone 22. Cable entries and glands per customer specification.

More about this product
Pepperl+Fuchs Website

ATEX Certification IECEx Certification GOST-R Certification

EX D SWITCH DISCONNECTOR 80 A 6 POLE SDSS806

An Ex d IIB certified 80 A 6-pole switch disconnector made from cast stainless steel. Suited for installation in Zone 1, Zone 2, Zone 21 and Zone 22. Comes with padlockable rotary switch.

More about this product
Pepperl+Fuchs Website

ATEX Certification IECEx Certification

EX D FUSED SWITCH DISCONNECTOR 63 A SFS634

An Ex d IIB certified 63 A 4-pole fused switch disconnector made from cast stainless steel. Suited for installation in Zone 1, Zone 2, Zone 21 and Zone 22. Comes with padlockable rotary switch, fuse breaking capacity 80 kA.

More about this product
Pepperl+Fuchs Website

ATEX Certification IECEx Certification

EX D DIRECT ONLINE STARTER/ISOLATOR 75 KW DOLSD75/415/SS

An Ex d IIB certified 75 kW direct online starter with integrated switch disconnector made from cast stainless steel. Size: 560 mm x 560 mm x 266 mm. Installation in Zone 1, Zone 2, Zone 21 and Zone 22. Coil voltage 415 V, suitable for Ex e motors.

More about this product
Pepperl+Fuchs Website

ATEX Certification IECEx Certification